Graco Snugride and Snugride 32 and Snugride 35 plus
Safe Seat Infant car seat cover and canopy
replacement instructions
|
Replacement Car Seat and Canopy Instructions
Carseat Cover Replacement
1. Remove original Graco cover from carseat. Instructions on how to do this can be found in your Graco
handbook.
If you do not have your handbook then please follow these directions:
a.) In the back of the carseat, unlatch the seatbelts from the metal bracket
b.) Pull the loose seatbelts from the front, and they should slip right out of the seat
c.) Once the seatbelts are out of the original Graco cover, then you will need to remove the
center buckle (this is located in the center of the seat where the 5 point harness clicks into) to this
you will need to pull the buckle belt down at the end of this 5" belt is a flat metal bracket you need
to turn the metal bracket sideways, long side up and down then slide the flat metal bracket through
the carseat and hole then remove the buckle and strap through the hole and cover set it aside then
remove the old Graco cover.
2. Once you have removed the old Graco cover, slip your Nollie Cover on the carseat frame and repeat the
process in reverse, making sure all seatbelts are placed in the correct places and secured in the back
with the metal bracket trough the top of the NollieCover then through the plastic hole in the seat. Once
you have done this make sure to place the metal bracket back the same way. Give it a slight tug from the top
and it will click back into place.
Canopy Replacement
1. Push the Graco canopy to one side, exposing the plastic support bars that hold the canopy in place.
2. The center of the support is where the canopy comes apart. Using both hands, pull the canopy support
bar apart (as if you were playing tug-of-war).
3. Once the support bars are apart, remove the old Graco canopy and slip on the Nollie Cover Canopy.
4. Secure the support bars by snapping them shut, and then slide the canopy into place.
If you have any difficulty, please contact us