Britax- Companion
2005, 2006, 2007,2008
Infant seat
|
Britax Infant Companion – Replacement Car Seat and Canopy Instructions
Car seat Cover Replacement
1. Remove original Britax cover from car seat. Instructions on how to do this can be found in your Britax
handbook.
If you do not have your Britax handbook then please follow these directions:
a.) In the back of the car seat, unlatch the seat belts from the metal bracket
b.) Pull the loose seat belts from the front, and they should slip right out of the seat
c.) Once the seat belts are out of the original Britax cover, remove the old Britax cover.
2. Once you have removed the old Britax cover, slip your Nollie Cover on the car seat frame and repeat the
process in reverse, making sure all seat belts are placed in the correct places and secured in the back with the
metal bracket.
Canopy Replacement
1. Push the Britax canopy to one side, exposing the plastic support bars that hold the canopy in place.
2. The center of the support is where the canopy comes apart. Using both hands, pull the canopy support
bar apart (as if you were playing tug-of-war).
3. Once the support bars are apart, remove the old Britax canopy and slip on the Nollie Cover Canopy.
4. Secure the support bars by snapping them shut, and then slide the canopy into place (do this for both the
front and back support bars).
5. 2004 - Older model only- Use the 2 elastic bands with hook which are attached to the Nollie canopy, and
hook them under the carrying handle.
If you have any difficulty, please contact us 760-295-4383 or via email nolliecovers@yahoo.com