Cosco Alpha-Omega Elite (Eddie Bauer) – Replacement Car Seat and Headrest Slipcover Instructions
Carseat Cover Replacement
1. Remove original Alpha-Omega cover from carseat. Instructions on how to do this can be found in your
Alpha-Omega handbook.
If you do not have your Alpha-Omega handbook then please follow these directions:
a.) In the back of the carseat, unlatch the seatbelts from the ‘v’ shaped metal bracket
b.) Pull the loose seatbelts from the front, and they should slip right out of the seat
c.) Once the seatbelts are out of the original Alpha-Omega cover, remove the old Alpha-Omega cover. Make
sure you remove the plastic clips that attach the carseat cover to the carseat frame (your seatbelts slide through
those) – Retain these for use after your NöllieCover is in place.
d.) Since this carseat has an attached headrest, do not remove headrest cover from the headrest (headrest
instructions below).
2. Once you have removed the old Alpha-Omega cover, slip your NöllieCover on the carseat frame, and repeat
the process in reverse, making sure all seatbelts are placed in the correct places.
3. We have slightly modified the NöllieCover getting rid of all of the elastic bands and added our one-piece
fitted casing with elastic. Put the armrests through the two side holes in the NöllieCover. Pull the NöllieCover
snugly behind the plastic framing so that the elastic holds the NöllieCover behind the carseat frame – the whole
NöllieCover should fit this way with the elastic band in the casing fitting snugly behind the carseat frame.
4. Snap in the plastic clips that hold the carseat cover to the carseat frame. You are now done installing your
new NöllieCover.
Headrest Slipcover Installation
1. Remove the two plastic clips that hold the headrest cover to the headrest frame (the seatbelts slide through
them).
2. Slip the NöllieCover headrest slipcover over the existing headrest with original cover. Adjust the headrest
slipcover to fit snugly.
3. Snap the two plastic clips back to hold the headrest cover to the headrest frame.
4. Put on your seatbelt covers and belly pad before latching everything in place. Enjoy your NöllieCover.
If you have any difficulty, please contact us by email through our website at www.nolliecovers.com